Best Water Filters for Healthier Water Supply | Brita filters | Carbon Water filter

Mercury in Water Test Strips <50, 50, 100, 200, 500, 1000 ppm Bottle of 50 Test Strips, Result in 3 Minutes Mercury Check for water quality testing is a quick and easy method to test for high levels of Mercury. How to use metals check test strip: The test procedure for this test is simple and quick. Just dip one test strip into a 200 mL (7 oz) or greater water sample. Move the strip in a back and forth motion for 60 seconds. Remove the strip from the water sample and shake once to remove the excess water. Wait 30 seconds and then match to the closest color. Sensitivity: <50, 50, 100, 200, 500, 1000 ppm (mg/L) Total test time: 3 minutes 50 tests per bottle US Patent No. 6541369

click here to learn more

For optimal performance, re-calibrate your meters periodically or if testing TDS or conductivity levels in wide or different ranges. NaCl calibration solution, available in 1000 ppm. Comes in lightweight HDPE plastic bottles. Sealed with a coated foam liner. NaCl solution Available in 1000 ppm 3 oz. bottles (88.7 ml)

click here to learn more

HM Digital’s pH buffer solution comes in powder form, so it’s lightweight, takes up very little space, is inexpensive and has an indefinite shelf life. Variety pack of pH buffer solution. Simple to use. Powder has an indefinite shelf life. Total volume: 1.2 liters. Each powder packet makes 100 ml of solution (when mixed with distilled or deionized water) Contents: 3 packets of 4.0 pH, 6 packets of 7.0 pH, 3 packets of 10.01 pH Extra: Includes one empty 100 ml bottle Accuracy: +/- 0.02 pH at 25 degrees Celsius Preparation directions included with the pack

click here to learn more

DM-1: In-Line Dual TDS Monitor Measure the tap water coming in vs. the purified water going out of your water filtration system at any time. FEATURES Displays TDS levels of the feed water and product water with in & out electrode probes. Highly efficient and accurate due to its advanced microprocessor technology. Auto-Off function conserves battery power. The unit shuts off automatically after 10 minutes of non-use. Dual Range 0-9990 ppm (From 0 – 999 ppm the resolution is 1 ppm. From 1000 to 9990 ppm, the resolution is 10 ppm, indicated by a blinking ‘x10′ image.) Factory Calibrated: meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver. Comes equipped with John Guest Quick-Connect T-fittings as shown. Installs quickly and easily.

click here to learn more

PH-200: Waterproof pH Meter Ideal for all pH testing, water purification applications, wastewater regulation, aquaculture, hydroponics, colloidal silver, labs & scientific testing, pools & spas, ecology testing, boilers & cooling towers, water treatment, wine, coffee, agriculture and more. Measures pH and Temperature Auto-ranging three point calibration with digital fine tuning Includes 4 pH buffer solution in a sponge embedded in a clear cap Waterproof housing Simultaneous temperature display Measurement Range: 0-14 pH Digital automatic calibration (one point), with digital fine tuning Auto-off function, data-hold function and low-battery indicator Display: large and easy-to-read LCD screen includes simultaneous temperature reading Factory Calibrated: The PH-200 meter is three-point factory calibrated to 4, 7, and 10 pH. The meter can be recalibrated with digital calibration using the push buttons, rather than a screwdriver. Includes a cap, batteries, lanyard, and pH 7.0 buffer

click here to learn more